Cardiovascular Fitness Procedures Manual

(coco) #1

Chief technologist:

„ Adjust the guards when the gap between the roller and the guard exceeds 3/8 of an

„ Disconnect the treadmill power cord from the receptacle (outlet).

„ Loosen, but do not remove, the two screws attaching the rear roller guard to the deck
(hold nuts underside with your finger).

„ Slide the rear roller guard towards the rear until the gap between the two is
approximately 0.1 inch (the thickness of two quarters).

„ Tighten the two mounting screws on the rear roller guards.

„ Connect the power cord.

Figure 2-2. Treadmill calibration
Free download pdf