SolidWorks 2010 Bible
Chapter 3: Working with Sketches FIGURE 3.50 Creating the extrusion from the new sketch Summary Sketching in SolidWorks is somet ...
...
CHAPTERCHAPTER Creating Simple Parts, Assemblies, and Drawings IN THIS CHAPTER Establishing design intent Building a simple part ...
Part I: SolidWorks Basics a bronze bushing, and is bolted to a plate below it.” This does not give you enough information to des ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings ...................................................... What is the ma ...
Part I: SolidWorks Basics Cross-Reference Chapter 10 discusses configurations and feature suppression in depth. n l (^) Insert P ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings . . . . . . . . Deciding where to start The first feature that you c ...
Part I: SolidWorks Basics FIGURE 4.2 Using a center point rectangle to build symmetry about the Origin Making it solid Next, cli ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings Extruding from a selection The From panel establishes where the Extru ...
Part I: SolidWorks Basics continued l (^) Up to Surface. Up to Surface could probably be better named Up to Face, because the en ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings The Reverse Offset option l Through All. The Through All end conditio ...
Part I: SolidWorks Basics continued By default, the Direction of Extrusion is normal to the sketch plane, but you can also selec ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings Using Instant 3D Instant 3D enables you to pull handles to create ext ...
Part I: SolidWorks Basics FIGURE 4.3 Using Instant 3D and Live Section Instant 3D also offers a tool called Live Section. Live S ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings Making the first extrude feature Going back to the sketch in Figure 4 ...
Part I: SolidWorks Basics FIGURE 4.5 Methods for creating the groove With a thin feature cut, you sketch the centerline, and in ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings To create the offset for your part, follow these steps: Open a sketc ...
Part I: SolidWorks Basics Sketch techniques .................................................................................... ...
Chapter 4: Creating Simple Parts, Assemblies, and Drawings You can delete the Horizontal relation by selecting the icon on the s ...
Part I: SolidWorks Basics FIGURE 4.9 Using the prompt to close a sketch setting Click the Extrude tool on the Features toolbar. ...
«
5
6
7
8
9
10
11
12
13
14
»
Free download pdf