Titel_SS06

Launch computation Table of content for quick navigation Exit the CodeCal program Sheet CodeCal menu list manipulation Checks ac ...

A.4 Examples This section comprises selected examples. They illustrate the usage and features of CodeCal. They all use the examp ...

Figure 4 shows where general input can be entered. This comprises the name of the editor, date of analyses and additional commen ...

Figure 6 illustrates, where the variable load can be specified. Distribution type, mean value, standard deviation and quantile p ...

A.4.2 DS1-B-M2/3: Reliability index evaluation for DS1 and two or three materials A.4.2.1 Description This example is based on t ...

In order to consider two or three materials, select the appropriate option button in the section computation option, see Figure ...

Select optimization Select the number of materials to be considered Target reliability index Safety factors to be optimized Weig ...

A.4.4.2 Data Input Most required entries have to be inputted like already shown in the foregoing examples. Therefore, only the d ...

Reliability indexes Figure 16. Calculated reliability indexes for DS2 and one material. A.4.5 DS2-O-M1/2/3: Optimization of safe ...

A.4.5.3 Output After pressing the Compute button the sheet CodeCal DS2 is activated and the reliability indexes are evaluated fo ...

Annex B General Considerations on the Planning of Experiments Annex B.1 ...

B.1 Introduction B. Planning of experiments is an issue of high relevance across the different engineering disciplines. Even tho ...

Establishmodel hypothesis for the description of the experiment physics distribution(s) parameters Identify free and controlled ...

function may be assessed by noting that the observed values are to be considered as the minimum value of two (independent) reali ...

Annex B.5 standard deviation have a common mean value. B.4 Reporting of Test Results B. When the various hypotheses have been te ...