Mechanical APDL Basic Analysis Guide

10.6.3. Choosing the Display Used for Plots When you are displaying either the ELEM or GRPH entity type, you can control the typ ...

Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information ...

Chapter 11: General Graphics Specifications Many graphics features apply to any kind of ANSYS graphics display. These general gr ...

11.2.3. Deleting ANSYS Windows To delete a window, either enter DELE in the XMIN field on the /WINDOW command (Utility Menu> ...

Figure 11.1: Focus Point, Viewpoint, and Viewing Distance Focuspoint Displaycoordinate systemorigin Distance Viewpoint X Y Z Vie ...

650536 value. Increase resolution to the maximum value allowed for that setting. Also note that even though you can now run 3-D ...

11.3.7. Resetting Automatic Scaling and Focus Anytime that you change the viewing distance or focus point, your explicitly-defin ...

Figure 11.2: The Window Options Dialog Box The default, legend setting is the user-defined “Multi-Legend.” (Utility Menu> Plo ...

Figure 11.4: The Multi Legend Contour Legend Note The settings in the Window Options dialog box will in many cases take preceden ...

/PLOPTS,WP,ON specifies that the working plane be turned on for subsequent displays. In this case, the working plane is drawn a ...

The requisite developer's kit software had been included in the applicable ANSYS code, and drivers for the system you are instal ...

Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information ...

Chapter 12: PowerGraphics Two methods are available for displaying graphics: The Full Model display method. Invoke this method ...

12.2. When to Use PowerGraphics Using the PowerGraphics display method has distinct advantages, since graphics displays are plot ...

GUI: Main Menu> General Postproc> Options for Outp Utility Menu> List> Results> Options Utility Menu> PlotCtrl ...

The program unaverages nodal results and sorts them by element number. Averaging results does not affect element results plots. ...

Chapter 13: Creating Geometry Displays A geometry display is a display of your model's geometric features (keypoints, areas, nod ...

Com- GUI Menu Paths Purpose mand KPLOT Utility Menu> Plot> Keypoints Displays a plot of keypoints Utility Menu> Plot> ...

Figure 13.1: Element Plot of SOLID65 Concrete Elements 13.2.1.2. Displaying Only the Edges of an Object While working with displ ...

13.2.1.7. Changing the Number of Facets Area and volume raster displays are made up of numerous small facets (or polygons). Occa ...