Mechanical APDL Basic Analysis Guide

Chapter 9: Selecting and Components If you have a large model, it is helpful to work with just a portion of the model data to ap ...

These functions are illustrat ed and described in the following table. Table 9.1: Selection Functions Select FullSet InactiveSub ...

For additional information on picking, see Graphical Picking in the Operations Guide. 9.1.1. Selecting Entities Using Commands T ...

It is sometimes useful to plot one entity type and select another. For example, in a model with hidden faces, you may want to ob ...

those lines, all elements belonging to these areas, lines, and keypoints, and all nodes belonging to these elements, by simply i ...

Figure 9.2: Layered Shell (SHELL281) with Nodes Located at Midplane Nodesloc atedatthemidplanewithKEYOPT(11)= 0 Figure 9.3: Laye ...

the function you can perform with them. See the appropriate command documentation for specific capabilities and limitations. Not ...

Figure 9.4: Nested Assembly Schematic STATOR PERMMAG ROTOR WINDINGS MOTOR AIRGAP STATASM ROTORASM Assuming that the assembly ROT ...

9.3.4. Adding or Removing Components Issuing the CMEDIT command (Utility Menu> Select> Comp/Assembly> Edit Assembly) al ...

Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information ...

Chapter 10: Getting Started with Graphics The ANSYS program (and the associated DISPLAY program) enable you to portray almost an ...

10.2.1.1. X11 and X11C. Graphics Device Name = X11:The X11 graphics driver incorporates X - a distributed windowing system devel ...

Sun OpenGL SGI OpenGL IBM OpenGL HP OpenGL DEC OpenGL 3-Button Mouse Y Y Y Y Y Remote Network Access Y[ 1 ] Y Y Y Y Hidden Line ...

Affected Description/Example Driver Environment Vari- able Disables double buffering. Applies to HP and SGI 12-bit plane systems ...

10.4. System-Dependent Graphics Information This section describes factors affecting how ANSYS graphics display on different har ...

Log onto a remote host (via Telnet, login, etc.). Type the following command or commands to tell the remote host to display X11 ...

pcltrans -C -p file.pjet.xx | lp -oraw The last example assumes that the PaintJet is the default output device. Notes The -P op ...

setenv OPENWINHOME path/openwin setenv LD_LIBRARY_PATH /ansys_inc/v150/ansys/syslib/sun64:/ansys_inc/v150/ansys/lib/sun64:/usr/l ...

To obtain a more "permanent" image, you need to execute one of the plot functions (such as Utility Menu> Plot> Volumes) or ...

Two windows (left and right of the screen, or top and bottom) Three windows (two at the top of the screen and one at the bottom ...