Mechanical APDL Basic Analysis Guide
13.2.1.12. Vector Versus Raster Mode The /DEVICE command (or /SHOW command) allows you to toggle between vector and raster mode. ...
On 2-D devices, ANSYS displays only the visible faces of the selected items. Using a small value for the /SHRINK command (Utilit ...
optimal settings. This dialog box, along with a description of each of the controls, is shown in the fol- lowing description: Fi ...
Element Tessellation Resol- ution Click on this pull-down menu to display three choices for the resolution of your element displ ...
Real types Element types Element locations (for reordered elements) Contour values (integer only; on element displays) Solid-mo ...
For body force load contours, use /PBF (Utility Menu> PlotCtrls> Symbols)./PBF applies to finite- element loads only; body ...
14.1. Commands for Creating Geometric Results Displays In a geometric results display, you can review your solution results in a ...
14.2. Options for Creating Geometric Results Displays The following commands create geometric results displays in POST1: Table 1 ...
Figure 14.2: A Typical ANSYS Results Plot 14.3. Changing the Specifications for POST1 Results Displays Besides reading about the ...
14.3.2. Controlling Vector Symbols in Your Results Display You have two options for controlling vector symbols: Displaying noda ...
map file by using the CREATE option of the /CMAP command. You can then read that reversed color map file into the database, also ...
Driver Contour Display You can display more than nine contours, but the number of contours displayed will be rounded down to the ...
GUI: Utility Menu> PlotCtrls> Animate> Q-Slice Contours Utility Menu> PlotCtrls> Animate> Q-Slice Vectors 14.5 ...
Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information ...
Chapter 15: Creating Graphs If you want to review your material property curves, trace the time-history response of your system, ...
Command(s):FSPLOT GUI: Main Menu> General Postproc> Fatigue> Store Stresses> Plot Stresses To calculate and graph pa ...
graph of a resulting deflection (with magnitude ~10-1). The deflection curve would appear to be a straight line if plotted to th ...
Command(s):NSOL,ESOL GUI: Main Menu> TimeHist Postpro> Define Variables Main Menu> TimeHist Postpro> Elec&Mag> ...
15.2.3.6. Setting the Y Range By default, your graph will contain the full range of available Y-variable data. Use the /YRANGE c ...
Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information ...
«
10
11
12
13
14
15
16
17
18
19
»
Free download pdf