Scale aviation modeller international

YOU NEED THIS MAGAZINE! WÜRGER Eduard 1/48 New-Tool Fw190-A FOXBAT Photo-Bombing ICM 1/48 MiG-25RB RAF 100 Westland Lysander FIR ...

Volks-0518-WP.indd 1 13/04/2018 14: Volks-0518-WP.indd 1 13/04/2018 14: ...

Mail Order: (all major credit cards accepted) Harbour Road, Oulton Broad, Lowestoft, Suffolk NR32 3LZ England UK local rate numb ...

22 Navy Ghost Airfix 1/72 Phantom FG.1 by Huw Morgan 14 Würger Eduard 1/48 New-Tool Fw190-A4 by Jay Blakemore W ell, that is it! ...

part assembly, so I will say this: take your time over each step, and allow each to dry thoroughly before moving to the next sta ...

ICM 1/48 MiG-25RB by Michael Chilestone W e may think “photo- bombing” is a new fad, but the Soviets could be said to have used ...

part assembly, so I will say this: take your time over each step, and allow each to dry thoroughly before moving to the next sta ...

The kit recommends Revell and Tamiya acrylic paint reference numbers for each colour. The nose wheel bay is metallic steel (as a ...

the cockpit would not be as much of a focus as usual. But look at the photos, (or better still, if you can, see it on the Milton ...

and the lower ventral fin; these are both a straightforward assembly. The wings are also straightforward, although I found a tou ...

hence my emphasis earlier on checking and re-checking fit before committing to cement. The assembly just would not click into pl ...

sprayed a few black lines roughly along major panel edges and control surface breaks. Whilst I did want some sort of contrast, m ...

I drilled the leg and the broken part, cut a small piece of thin alloy rod to beef it up, and superglued it. The rest of the und ...

Eduard 1/48 New-Tool Fw190-A4 by Jay Blakemore O rnithologically speaking, the Würger is a carnivorous bird that hangs its dead ...

Eduard’s now familiar ProfiPak series was the late version of the Fw190A-4. This sub-type, for which I have been unable to find ...

details to reveal the aluminium lacquer beneath. My method of washing paint away using a soft brush, loaded with white spirit, i ...

parts are the most problematic to fit to the kit. They require that you carefully drill and cut the upper wing sections so as to ...

overall coat of Alclad Grey Primer followed by that manufacturer’s Polished Aluminium. Over this I airbrushed Colourcoats enamel ...

masked with the pre-cut set provided in the ProfiPak. No filler was required anywhere on the airframe and no problems were encou ...

questionable colours. Such was the case with the decals to be found in this otherwise perfect Focke-Wulf package. Luckily, I had ...