Australian Wood Review – June 2017

40 Australian Wood Review PROJECT Which wood to use? Any dimensionally stable wood can be used, and my choice was tigerwood – sc ...

http://www.woodreview.com.au 41 PROJECT Checking the sticks After I glued the inlay strips in place (photo 4), I planed them flu ...

11 Pinhole Sightings Rob Porcaro once wrote that the use of a single pin hole would not improve the vision result when sighting ...

VI S IT: http://www.greatmagazines.com.au S E LEC T: Australian Wood Review ENTER: promo code ADV/17061 CALL: 1800 807 760 QUOTE ...

44 Australian Wood Review PROFILE L ife altering moments aren’t always pleasant, in fact times of suffering can often teach us m ...

http://www.woodreview.com.au 45 PROFILE Tabibito: Memory of Life In Japanese tabibito means ‘journeyman’ and the sense of discov ...

Q&A How long to design Tabibito? A couple of weeks. How long to make? About 180 hours. How many compartments? Four drawers, ...

http://www.woodreview.com.au 47 PROFILE 6 There are no keys or handles to open the Tabibito box but when you look down into the ...

48 Australian Wood Review WOODCARVING Carving a V-Grooved Bowl For Robert Howard, creating his best work is about enjoying proce ...

http://www.woodreview.com.au 49 WOODCARVING 3 2 With a compass set at 145mm, from the mid-point of one end, mark an arc across ...

50 Australian Wood Review WOODCARVING As a helpful guide, you might prefer to make up this template. The vertical lines are 10m ...

the gouge high, and progressively dropping the handle as the blade moves down the slope of the cut. This action becomes automati ...

Once the surface is finished, and the top slope is carved, mark out guide lines for the V-cuts to follow. These can be randomly ...

arrows indicate the carving directions I have followed. The left and right sides are mostly long grain, while the top side is en ...

54 Australian Wood Review WOODCARVING Looking again at our template diagram, you can see the three small triangular areas that ...

http://www.woodreview.com.au 55 PROJECT Homage Piece Drawing on inspiration from the late Greg Collins, Graham Sands makes a ven ...

I greatly admired the late Western Australian craftsman Greg Collins. He was internationally renowned and received many awards f ...

http://www.woodreview.com.au 57 PROJECT The table is 1225 x 757 x 450mm high, the top is 50mm thick and the legs are 50mm square ...

58 Australian Wood Review PROJECT inserting the rods without binding and the bending of the cauls under pressure. To measure the ...

http://www.woodreview.com.au 59 PROJECT tape (photo 8), then hinged open so adhesive could be applied to the edges (photo 9). Af ...