Estimating in Building Construction

162 CHAPTER THIRTEEN EXAMPLE 13-16 FIGURE 13.38.Header Example. Header Quantity No. of Openings Size Header Length Pieces 93  0 ...

Wood 163 board sheathing must be covered by another material (such as brick, wood, or aluminum siding), while the plywood may be ...

164 CHAPTER THIRTEEN EXAMPLE 13-18 INTERIOR AND EXTERIOR WALL WORKUP SHEETS Following are the workup sheets (Figure 13.44) for t ...

Wood 165 The headers and trimmers required for any openings (such as stairways, fireplace, and attic access openings) are consid ...

166 CHAPTER THIRTEEN 13–6 Roof Assembly In this section, a quantity takeoff of the framing required for the roof assembly of a w ...

Wood 167 Headers and Trimmers. Headers and trimmers are required for any openings (such as chimneys) just as in floor and ceilin ...

168 CHAPTER THIRTEEN EXAMPLE 13-23 RIDGE There is 52 lf of ridge from the edge of the overhang to the far overhang. Purchase Qua ...

Wood 169 13–7 Trim The trim may be exterior or interior. Exterior items include moldings, fascias, cornices, and corner boards. ...

EXAMPLE 13-27 PRICED FRAMING ESTIMATE 170 CHAPTER THIRTEEN Light Framing Unit Labor Hours Sills 100 l.f. 2.0 to 4.5 Joists, floo ...

Wood 171 shape (design) are possible. Ducts, piping, and conduit may be easily incorporated into the trusses. The trusses are on ...

13–11 LAMINATED BEAMS AND ARCHES Laminated structural members are pieces of lumber glued under controlled temperature and pressu ...

Laminated decks are available in a variety of thicknesses and widths. Installation costs are reduced substantially. Note the woo ...

Web Resources http://www.wwpa.org http://www.apawood.org http://www.wpma.org http://www.bc.com http://www.southernpine.com http: ...

175 THERMAL AND MOISTURE PROTECTION CHAPTER FOURTEEN 14–1 Waterproofing Waterproofing is designed to resist the passage of water ...

176 CHAPTER FOURTEEN FIGURE 14.2.Materials Required for Membrane Waterproofing per Square. the cost is greater for vertical surf ...

Thermal and Moisture Protection 177 Liquid admixtures may be measured and added directly, which is a little less trouble. The co ...

178 CHAPTER FOURTEEN 14–7 Parging (Plastering) The material used to parge on exterior portions of founda- tion walls below grade ...

Thermal and Moisture Protection 179 Insulation placed between the framing members may be pumped in or laid in rolls or in sheets ...

180 CHAPTER FOURTEEN 14–9 Roofing Roofingis considered to include all the material that actually covers the roof deck. It includ ...

Thermal and Moisture Protection 181 and details should be checked to determine the amount of overhang and type of finishing requ ...