Microsoft Word - Woodshop 101 Part 1 of 3

Radius-A straight line that goes from the center to the outer edge of a circle. Diameter-A straight line that passes through the ...

Step 4 Now we need to draw two more lines that will divide up the circles even more. Using your combination square, set the head ...

Step 5 Using your coping saw cut out the circles on the top and bottom pieces. If you’re like me your circles may need a little ...

Next we need to get ready to drill out the holes for the pencils. With the two pieces screwed together we can drill the holes in ...

Step 6 With the two pieces marked we’re ready to drill our holes. We determined that a good sizeholeforourpencilstofit through w ...

Step 7 With all the holes drilled, we need to sand all the parts of our pencil holder. Use your sanding block for the flat parts ...

any glue in the base hole or on the bottom part of the dowel that’s sticking out of the bottom piece or your pencil holder won’t ...

and with the marks you made earlier on the edges of the top and bottom piece line up the two parts. Step 9 Finish your pencil ho ...

Battleship ...

Things you’ll need Hammer Screwdriver Handsaw Crosscut box 1 5/8” drywall screws Flat metal washers that the head of the screw c ...

Hint: We went to the Internet and looked up battleships on a search engine and found pictures of real battleships and printed of ...

Step 1 We got the basic shape of the hull from the pictures we look up on the Internet. Measure down 7 ¾” from the bow section a ...

Clamp the 2” x 6” to the workbench and then clamp your guide block to help cut these tricky angles. A 2 x 6” can be difficult to ...

Step 4 Now cut all the pieces down to size using your handsaw. The crosscut box will come in handy for this. Dowels especially c ...

Step 6 Building the gun turrets is easy. We used different sizes throughout our battleship but they are all made the same way. F ...

bit for the size dowel you’re using drill holes into the turrets. We didn’t measure how deep to drill them. Instead we just inse ...

Step 8 Let’s start putting things together. For the buildings, spread some glue on the bottom of the pieces and nail them into p ...

through it and into the deck. In order for the gun turrets to turn the hole going through it needs to be larger than the screw y ...

Step 9 All that’s left to do now is to finish your battleship with something. We chose a gray paint to better resemble a real ba ...

Media Storage Rack ...