RX8--Transmission (Manual & Auto)

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Start the en ...

DTC P0753 DTC P0753 Shift solenoid A circuit malfunction (open circuit/short to ground or power supply) DETECTION CONDITION Ope ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

INSPECT AT SOLENOID VALVE CONNECTOR FOR POOR CONNECTION Turn the ignition switch to the LOCK position. Disconnect the AT soleno ...

Inspect the resistance between shift solenoid valve A (part-side) terminal A and body ground. Is the resistance within 2.25 ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Drive the ve ...

DTC P0758 DTC P0758 Shift solenoid F circuit malfunction (open circuit/short to ground or power supply) DETECTION CONDITION Ope ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

INSPECT AT SOLENOID VALVE CONNECTOR FOR POOR CONNECTION Turn the ignition switch to the LOCK position. Disconnect the AT soleno ...

Inspect the resistance between shift solenoid valve F (part-side) terminal A and body ground. Is the resistance within 2.25 ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Drive the ve ...

DTC P0761 DTC P0761 Shift solenoid B malfunction (stuck off) DETECTION CONDITION Large difference between actual gear ratio and ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Start the en ...

DTC P0762 DTC P0762 Shift solenoid B malfunction (stuck on) DETECTION CONDITION Large difference between actual gear ratio and ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Start the en ...

DTC P0763 DTC P0763 Shift solenoid B circuit malfunction (open circuit/short to ground or power supply) DETECTION CONDITION Ope ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...