RX8--Transmission (Manual & Auto)

NO.28 STARTER DOES NOT WORK 28 Starter does not work DESCRIPTION Starter does not work even when in P or N position. POSSIBLE ...

NO.29 GEAR POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE 29 Gear position indicator light does not illuminate in M ran ...

NO.30 GEAR POSITION INDICATOR LIGHT ILLUMINATES IN D RANGE OR P, N, R POSITIONS 30 Gear position indicator light illuminates whe ...

NO.31 DOES NOT UPSHIFT IN M RANGE 31 Does not upshift in M range DESCRIPTION Gear position indicator light in dashboard illumin ...

NO.32 DOES NOT DOWNSHIFT IN M RANGE 32 Does not downshift in M range DESCRIPTION Gear position indicator light in dashboard ill ...

DTC TABLE ×: Available DTC No. Condition MIL AT warning light illuminated DC Monitor item Memory function Page P0705 Transmissio ...

P0740 Torque converter clutch (TCC) system malfunction ON NO 2 CCM × (See DTC P0740 .) P0743 Torque converter clutch (TCC) solen ...

P0882 TCM B+ low ON NO 1 CCM × (See DTC P0882 .) P0960 GND return circuit malfunction ON YES 1 CCM × (See DTC P0960 .) P1759 2-4 ...

DTC P0705 DTC P0705 Transmission range (TR) switch circuit malfunction (short to power supply) DETECTION CONDITION Two or more ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

VERIFY CURRENT INPUT SIGNAL STATUS: IS CONCERN INTERMITTENT OR CONSTANT? Turn the ignition switch to the LOCK position. Disconn ...

Yes Go to the next step. 6 INSPECT TR SWITCH CIRCUIT FOR SHORT TO POWER SUPPLY Turn the ignition switch to the ON position (eng ...

DTC P0706 DTC P0706 Transmission range (TR) switch circuit malfunction (open circuit/short to ground) DETECTION CONDITION No ra ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

Yes Turn the ignition switch to the LOCK position. Connect the TCM connector. Go to the intermittent concern troubleshooting pr ...

Disconnect the TR switch connector. Inspect for continuity between the TCM (wiring harness-side) and body ground.
P position: ...

INSPECT TR SWITCH CONNECTOR FOR POOR CONNECTION Turn the ignition switch to the LOCK position. Inspect for poor connection (suc ...

DTC P0707 DTC P0707 M range switch, up switch or down switch circuit malfunction (open circuit/short to ground) DETECTION CONDIT ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

INSPECT SELECTOR LEVER GROUND CIRCUIT FOR OPEN CIRCUIT Inspect for continuity between the selector lever (wiring harness-side) ...