RX8--Transmission (Manual & Auto)

INSPECT AT SOLENOID VALVE CONNECTOR FOR POOR CONNECTION Turn the ignition switch to the LOCK position. Disconnect the AT soleno ...

Inspect the resistance between shift solenoid valve B (part-side) terminal A and body ground. Is the resistance within 2.25 ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Drive the ve ...

DTC P0766 DTC P0766 Shift solenoid C malfunction (stuck off) DETECTION CONDITION Large difference between actual gear ratio and ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Start the en ...

DTC P0767 DTC P0767 Shift solenoid C malfunction (stuck on) DETECTION CONDITION Large difference between actual gear ratio and ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Start the en ...

DTC P0768 DTC P0768 Shift solenoid C circuit malfunction (open circuit/short to ground or power supply) DETECTION CONDITION Ope ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

INSPECT AT SOLENOID VALVE CONNECTOR FOR POOR CONNECTION Turn the ignition switch to the LOCK position. Disconnect the AT soleno ...

Inspect the resistance between shift solenoid valve C (part-side) terminal A and body ground. Is the resistance within 2.25 ...

Make sure to reconnect all disconnected connectors. Clear the DTC from the TCM memory using the WDS or equivalent. Drive the ve ...

DTC P0841 DTC P0841 Oil pressure switch B circuit malfunction DETECTION CONDITION When driving, hydraulic pressure should be ge ...

Diagnostic procedure STEP INSPECTION ACTION Yes Go to the next step. 1 VERIFY FREEZE FRAME DATA HAS BEEN RECORDED Has FREEZE FR ...

INSPECT AT SOLENOID VALVE CONNECTOR FOR POOR CONNECTION Turn the ignition switch to the LOCK position. Disconnect the AT soleno ...

Yes Repair or replace the wiring harness, then go to Step 15. 10 INSPECT TCM CIRCUIT FOR SHORT TO GROUND Inspect for continuity ...

Clear the DTC from the TCM memory using the WDS or equivalent. Drive the vehicle and make sure that the gears shift smoothly fr ...

DTC P0846 DTC P0846 Oil pressure switch C circuit malfunction DETECTION CONDITION When driving, hydraulic pressure should be ge ...