Picture Yourself Making Jewelry and Beading

Ancient Elements Textured Silver Earrings These rustic-looking pieces get their texture from a cement block! ...

Ancient Elements Chapter 6 TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips Masking tape Concrete block or landscape paver H ...

3.Place the two H” ×1” sterling silver rectan- gle pieces onto the sticky side of a piece of masking tape. This will help you to ...

Ancient Elements Chapter 6 6.The silver rectangles will have a slight curve to them, and the edges will be misshapen and sharp a ...

10.Using a^1 ⁄ 16 ” drill bit, drill holes into each of the silver rectangles with a handheld rotary tool, flex shaft, or drill ...

Ancient Elements Chapter 6 15.Add the bar component and textured silver rectangle to the jump ring. Close the jump ring. 16.Gent ...

Concrete Textured Sterling Silver Orthoceras Fossil Pendant ...

Ancient Elements Chapter 6 TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips Masking tape Concrete block or landscape paver H ...

4.Place the piece of masking tape with the silver rectangle sticky side down onto a concrete block or landscape paver. 5.With a ...

Ancient Elements Chapter 6 8.Put on the safety glasses. Place the textured silver rectangle onto a hard, flat surface. Place the ...

12.After oxidizing the various pieces, use fine steel wool to remove the darkened areas on the raised surface of the silver rect ...

Ancient Elements Chapter 6 14.Using two pairs of chain nose pliers, open the 5.3 × 3.2 mm 16-gauge sterling silver oval jump rin ...

Concrete Textured Bracelet ...

Ancient Elements Chapter 6 TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips Masking tape Concrete block or landscape paver H ...

1.Use the ruler to measure and mark five H” × 1” rectangle pieces of 18-gauge sterling sheet silver. 2.Using a jeweler’s saw or ...

Ancient Elements Chapter 6 7.Measure^1 ⁄ 16 ” from each end of the textured silver rectangles and place a mark in the cen- ter o ...

9.Using a^1 ⁄ 16 ” drill bit, drill holes into each of the silver rectangles with a handheld rotary tool, flex shaft, or drill p ...

Ancient Elements Chapter 6 13.With two pair of chain nose pliers pointing up, hold the jump ring with the opening at the top. Ro ...

...

7 Deco Design Copper and Sterling Silver Earrings and Necklace ...