Picture Yourself Making Jewelry and Beading

11.Apply liver of sulfur or oxidizing solution to the three pieces of rectangle wire. It is very important to follow any safety ...

Three-Strand Sky Earrings and Necklace Chapter 11 15.Repeat this step using two 14×10 mm faceted flat oval beads, repeat this st ...

17.Using 5 mm 18-gauge jump rings, connect the two 14×10 mm faceted flat oval wrapped loop beads to one end of a 2” piece of rec ...

Three-Strand Sky Earrings and Necklace Chapter 11 21.Use the 6 mm 14-gauge jump rings to attach the jump ring connecting the thr ...

...

12 Fun Variations— Combining Components ...

Sterling Silver Stamped Disc Earrings Combine all the techniques you've learned to create these one-of-a-kind pieces. ...

Fun Variations—Combining Components Chapter 12 TOOLS NEEDED Jeweler’s saw or tip snips Marker Penny Chain nose pliers File Fine ...

2.Once you have cut the two discs from the sheet silver, use a file to refine the shape of the discs and to eliminate any rough ...

Fun Variations—Combining Components Chapter 12 5.This process may leave your discs misshapen or with sharp edges, so after you h ...

10.Apply liver of sulfur or oxidizing solution to the discs. It is very important to follow any safety recommendations the manuf ...

Fun Variations—Combining Components Chapter 12 Stamped Sterling Silver Disc Necklace ...

TOOLS NEEDED Jeweler’s saw or tip snips Marker Penny File Fine grit sanding pad Hard, flat surface Scissors Masking tape Nail se ...

Fun Variations—Combining Components Chapter 12 2.Once you have cut the three discs from the sheet silver, use a file to refine t ...

3.Place the discs onto a hard, flat surface. You can use masking tape on the edges of the discs to keep them in place while you ...

Fun Variations—Combining Components Chapter 12 10.Apply liver of sulfur or oxidizing solution to the discs. It is very important ...

Sterling Silver Stamped Disc and Rectangles Bracelet ...

Fun Variations—Combining Components Chapter 12 TOOLS NEEDED Ruler Marker Jeweler’s saw or tip snips Four pieces of 20-gauge flor ...

4.Place the piece of tape with the floral wire on top of a H” ×1” silver rectangle. 5.Place the piece of tape with the floral wi ...

Fun Variations—Combining Components Chapter 12 8.To cut I” 18-gauge sterling silver discs from the sheet silver, use a marker to ...