Picture Yourself Making Jewelry and Beading

...

10 Classic Wrapped Loop Earrings and Necklace ...

Basic Loop Earrings ...

TOOLS NEEDED Ruler Marker Wire cutters or tin snips Chain nose pliers Round nose pliers File MATERIALS NEEDED 20-gauge sterling ...

3.Use the round nose pliers and grasp the wire at the bend with the section that you bent pointing toward you and the longer par ...

Classic Wrapped Loop Earrings and Necklace Chapter 10 Use 20-gauge sterling silver wire, and slip the wire through a donut bead ...

Form a wrapped loop with 20-gauge sterling silver wire. Mix raku and glass beads. Form another wrapped loop at the other end. Ad ...

Use 20-gauge sterling silver wire and a stone with a predrilled hole. Slip the wire through the hole in the stone before forming ...

...

11 Three- Strand Sky Earrings and Necklace ...

Stamped Sterling Silver Bead Earrings Bring together elements of the sky and the earth in these silver and sky-blue beads. ...

TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips File Fine grit sanding pad Safety glasses Hard, flat surface Awl Hammer Nai ...

1.Use the ruler to measure and mark two I” pieces of 4 × 1 mm rectangle sterling silver wire. 2.Using a jeweler’s saw or tin sni ...

10.Place the nail set punch on the top of the rectangle wire where you have marked the wire and firmly strike the top of the nai ...

11.After stamping the circle shapes into the rec- tangle wire, apply liver of sulfur or oxidizing solution to the two pieces of ...

Three-Strand Sky Earrings and Necklace Chapter 11 18.Using two pairs of chain nose pliers, open a jump ring and attach the loop ...

Stamped Sterling Silver Wrapped Loop Bead and Chain Necklace ...

TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips File Fine grit sanding pad Safety glasses Hard, flat surface Awl Hammer Nai ...

1.Use the ruler to measure and mark one 5” and two 2” pieces of 4 × 1 mm rectangle sterling silver wire. 2.Using a jeweler’s saw ...

Three-Strand Sky Earrings and Necklace Chapter 11 10.Place the nail set punch on the top of the rectangle wire and firmly strike ...