Picture Yourself Making Jewelry and Beading

Sterling Silver Rectangle Wire and Seed Bead Earrings Follow the step-by-step instructions to make these basic bead earrings usi ...

Sterling Silver Crescent and Bead Earrings Chapter 5 TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips Safety glasses Hard, f ...

5.Put on your safety glasses! Place the 1” rectangle wire pieces onto a hard, flat surface. Place the point of the awl on the ma ...

Sterling Silver Crescent and Bead Earrings Chapter 5 8.Curve both 1” pieces of the rectangle wire into a “C” shape using a ring ...

9.Slide the head pin through the holes in the C-shaped rectangle wire to make sure that the holes are vertically aligned and tha ...

Sterling Silver Crescent and Bead Earrings Chapter 5 17.Hold the head pin with the beads and the rectangle wire on it in one han ...

Sterling Silver Rectangle Wire, Hollow Rubber Tube, and Turquoise Earrings ...

Sterling Silver Crescent and Bead Earrings Chapter 5 TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips Safety glasses Hard, f ...

4.Use the ruler to measure and mark^1 ⁄ 16 ” from one end of the 1H” pieces of rectangle wire and place a mark in the center of ...

9.Use the ruler to measure and mark the rub- ber tube into four equal pieces measuring K” each. Use scissors to cut the rubber t ...

11.Use the ruler to measure and mark^5 ⁄ 16 ” above the top piece of the hollow rubber tube. With the wire cutters or tin snips, ...

Sterling Silver Crescent and Bead Earrings Chapter 5 Sterling Silver Rectangle Wire, Pearl, and Chain Earrings ...

TOOLS NEEDED Ruler Marker Jeweler’s saw or tin snips Safety glasses Hard, flat surface Awl Hammer (^1) ⁄ 16 ” drill bit Handheld ...

Sterling Silver Crescent and Bead Earrings Chapter 5 1.Use the ruler to measure and mark two 1” pieces of 4 ×1 mm rectangle ster ...

6.Using a^1 ⁄ 16 ” drill bit, drill holes into each end of the rectangle wire pieces with a handheld rotary tool, flex shaft, or ...

Sterling Silver Crescent and Bead Earrings Chapter 5 12.Using the chain nose pliers, bend the head pin wire next to the top bead ...

14.Repeat this step on the second pearl and silver bead. Set these aside. 15.Place a head pin through the hole drilled into one ...

Sterling Silver Crescent and Bead Earrings Chapter 5 18.Repeat this process on the other hole in the C-shaped rectangle wire. In ...

...

6 Ancient Elements Textured Silver Earrings, Bracelet, and Necklace ...