Architectural and Engineering Design Standards

4) Testing time constraints: 50% load 2 hours, 100% load 6 hours. 5) Fuel required for the onsite test shall be furnished by UIH ...

b. Alternator: 1) Output – 480/277 volts wye, 3 phase, 4 wire, 60 Hz, not less than 965 kW @ 80% power factor load 2) Voltage Re ...

Appendix I UIHC Standard Fire Alarm Specification and Wiring Details November 1, 2016 ...

Addressable Fire Alarm System Installation All Fire Alarm installations will be per NFPA 70, 72, and other applicable codes. Fir ...

Annunciator cable shall be #18awg solid Black (-) and White (+) and twisted shield with Blue tape around each end of the cable w ...

Wire Manufacturer Note: Windy City Wire, General Cable, The Cable Company, Tappan Wire and Cable, or other approved manufacturer ...

Appendix J Intentionally Left Blank November 1, 2016 ...

Appendix K Architect/Engineer Compliance Disposition Form November 1, 2016 ...

APPENDIX K UIHC Architectural & Engi neering Design Standards Architect/Engineer Compliance Disposition Form Directions: Thi ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...

Division Section Description Standard Followed? Yes, No, N/A Rationale (Why was standard not followed? Why was exception taken? ...