Scale aviation modeller international
YOU NEED THIS MAGAZINE! FRENCH BANANA Italeri 1/ H-21C Shawnee NIGHT Revell 1/32 Fw 190 A-8/R11 Nightfighter Butcher of the FOKK ...
Spray Booth features & benefits: Built-in 360° revolving turntable 2.5m ventilation hose for extracting vapour & mist H ...
Fw 190A- http://www.eduard.com 1/ 003-Ads-0618.indd 3 11/05/2018 15: ...
6 Butcher of the Night Revell 1/32 Fw 190 A-8/R Nightfighter by PeteR Barker 28 Quickbuild Delfin AMK 1/72 Aero L-29 Delfin by G ...
Tfamous fighter aircraft of the German Luftwaffe. The A-8 variant represented the peak of development for the radial-he Focke-Wu ...
T he Focke-Wulf Fw 190, designed by Kurt Tank, was one of the most famous fighter aircraft of the German Luftwaffe. The A- varia ...
OPENING THE BOX As is usual with kits from Revell, the box opens at the ends, so it cannot be used as a working tray for parts. ...
This night fighter variant also includes a pair of spectacular ”eyebrows” (or are they love handles?) to shield the pilot’s nigh ...
perfectly with no need for fettling (for our international readers, fettling = adjusting the fit by cutting or sanding) or fille ...
airframe (and I’m easily pleased), I pre-shadowed the whole thing using XF-85 Rubber Black. On top of this went the first camouf ...
blowover of gloss seal from a rattle can, as this makes the paint so much more robust for handling. Then using the two greys abo ...
a hole I’d cut in the leading edge of the port wing at the behest of the instruction sheet at Stage 2. It appears to be for a la ...
“REVELL’S APPROACH TO 1/32 FIGHTERS IS A BREATH OF FRESH AIR IN MANY WAYS” WWW.SAMPUBLICATIONS.COM • JUNE 2018 • 13 1/ 006-13-FE ...
T his boxing of the DH.9a is a Wingnut Wings post- WWI aircraft, and upon looking at the box contents I knew I was in for a fun ...
mule was very appealing to me. It would also be a good chance to try to achieve a faded look to the canvas. CONSTRUCTION Constru ...
only fit issue I had with the entire kit; everything else went together perfectly, and any snags from this point on were due to ...
slowly creating what I think is a nice blotchy look, with the Light Blue and J.N. Grey merging quite nicely. Now I turned to the ...
of artist’s oils down the wing ribs, then a darker brown on the upper green areas. I wiped the paint down with mineral spirits, ...
modellers. I’ve seen modellers use thin wire, thread, stretched sprue, and even hair, but Wingnut Wings recommends EZ Line, and ...
started with a small drill bit in the centre, and then progressed to bigger sizes. This way I had more control and was less like ...
«
1
2
3
4
5
»
Free download pdf