Palestine International Airport (Al-Auja)
6.5 Terminal Building: An airport passenger terminal is a building or complex of buildings that serve as the interface between a ...
Overall Space Approximation: The primary users of airport passenger terminals are travelers, well-wishers, meeters/greeters, air ...
The second assumption: Gross terminal area is (14 퐦ퟐ) per design hour passenger. Estimation of the level of the peak hour passe ...
Table 6- 9 shows the number of peak hour enplaned passengers, as illustrated in Figure 6- 12. Table 6 - 9Peak Hour Enplaned Pass ...
Viewing the results of the first and second assumptions, it was noted that the swcond assumption recommends a slightly larger gr ...
of the gates equals to the Peak Hour Operations /2, as shown in Table 6- 11 , the peak hour operations that can be accommodated ...
The expected number of gates needed is listed in Table 6- 12. Table 6 - 12 Number of Gates Phase Year Number of Gates 2027 - 203 ...
CHAPTER 7 GEOMETRIC DESIGN OF THE AIRFIELD 7.1 Airport Design Standards The FAA has developed design guidelines to assist airpor ...
7.2 Runway Design 7.2.1 Runway Length: Airplanes today operate on a wide range of available runway lengths. Various factors, in ...
c- Maximum design takeoff weight = 1,267,658 pounds. d- Maximum design landing weight = 870,826 pounds. e- The temperature at st ...
Landing Length Requirements (see Figure 7 - 1 ): Step 1 – A380-800 Airport Planning Manual (APM) provides a landing chart for dr ...
Step 5 – No temperature adjustment, since the chart is valid for all temperatures. Step 6- Adjust the obtained length since the ...
Takeoff Length Requirement (see Figure 7 - 2 ). Step 1 – A380-800 Airport Planning Manual (APM) provides a takeoff chart at the ...
Step 5 – Notice that this chart can be used for airports whose mean daily maximum temperature of the hottest month at the airpor ...
7.2.2 Runway System Geometric Specifications Table 7- 3 "Runway dimensional standards, Approach category C, D, and E aircraft", ...
The runway system dimensions based on the ADG ( VI as specified in Table 5-3 ) as follows: a- Runway structural pavement (width ...
Figure 7 - 3 Runway system components, in m ...
7.2.1 Airfield Separation Requirements Related to Runways The minimum distance from the runway centerline to parallel taxiways, ...
7.2.2 Layout the Vertical Alignment It is desirable to minimize longitudinal grade changes as much as possible. However, it is r ...
a- Longitudinal Profile of Right Runway The profile for the centerline of the right runway was created and summarized in Table 7 ...
«
14
15
16
17
18
19
20
21
22
23
»
Free download pdf